Skip to product information
  • Vetonek Mesa de centro madera reciclada mixta 90x50x35 cm

Mixed Recycled Wood Center Table 90x50x35 cm

231,28 €
231,28 € 260,30 €
You save 11% (29,02 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This retro -style wood center table will be a great choice to add a rustic touch to the decoration of your home. The board and legs are made of solid solid wood, which has the characteristics of different woods such as mahogany, teak, mango wood, acacia, etc. Galvanized iron recycling barrel contributes to the strength of the table and its robust and industrial style. You may find holes caused by nails, screws or bolts along with other imperfections that highlight their authenticity. These imperfections reveal a rich history and have never been done on purpose. The wood comes from fallen trees naturally, wooden ships, wooden houses, etc. Each piece is unique and slightly different from the others. The signs of wear and craft work of this totally made table at hand give each piece a unique appearance and add a spectacular vintage style. Each step of the process is carried out with greater care. The assembly is easy. Important note: The colors can vary from one piece to another, so each of our center tables is unique. Delivery is random, which guarantees the exclusivity and individuality of the product.

  • Material: mixed recycled wood (bangkirai, mindi, meranti, mahogany, pine, teak, acacia, merbau), galvanized iron
  • Dimensions: 90 x 50 x 35 cm (length x width x high)
  • Handmade
  • Easy assembly

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.