PrGARDEN CUBOA BARBACE WITH 2 MATTE ORANGE 34.5 CM

57,47 €
57,47 € 64,68 €
You save 11% (7,21 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This bucket barbecue with two PROGARDEN handles is an excellent option to prepare a pleasant barbecue meal. It is small and easy to carry, but large enough to prepare food for several people. Thick carbon steel material: PrGarden garden grill is a perfect option for cooking outdoors, in the garden or balcony. It is made of thick carbon steel, and the lid and the barbecue cube have an enameled finish. .Parrilla easy to transport: the barbecue is very light, so you can take it anywhere.

  • Color: matte orange
  • Material: thick enameled carbon steel
  • Dimensions: 34.5 x 20 cm (Diameter X High)
  • Light barbecue bucket
  • With air outlets
  • 2 mangoes
  • Lower diameter: 30 cm/25 cm (exterior/interior)
  • Upper diameter: 34.5 cm/33 cm (exterior/interior)
  • Steel sheet thickness: 0.3 mm/0.5 mm (lower/upper)
  • Lid steel thickness: 0.3 mm
  • Easy to clean
  • With Metal BBQ logo
  • The delivery contains:
  • 1 x galvanized grill
  • 1 x coal grid

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.