Skip to product information
  • ProGarden Farol solar LED con vela ratán negro

PrGARDEN FAROL SOLAR LED with black rack sail

41,87 €
41,87 € 47,13 €
You save 11% (5,26 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This PROGARDEN LED LED lantern is the perfect lighting for gardens, patios, roads and balconies. The solar lamp is equipped with a battery that is loaded with sunlight. The lamp automatically absorbs solar energy during the day and turns it into electricity to load the battery. The Ratán lantern has an intermittent yellow LED, which emits a bright light at night. The lamp is automatically turned on when it darkens and turns off during the day. Our solar lamp is respectful of the environment, low consumption and barely requires maintenance. You will not have to pay the light bill, since the lamp works with solar energy. This solar lantern is suitable for hanging from a tree or any stick, thanks to the black rattan hook.

  • Color: Black, black-brown
  • Material: ABS, Ratán
  • Dimensions: 15 x 33 cm (high x diameter)
  • Design: Farol with candle inside
  • With black rattan hook
  • With 45 x 45 mm amorphous solar panel, 2 v 40 mAh
  • Light color: warm white
  • No ignition button/off
  • Suitable for outdoor use
  • Delivery includes:
  • 1 x LED solar lantern
  • 1 x AA / HR6 Ni-Mh 300 mah 1.2 V battery

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.