Skip to product information
  • Vetonek Silla reclinable con reposapiés cuero PE y madera curvada negro

Silla reclinable con reposapiés cuero PE y madera curvada negro

431,52 €
431,52 € 485,67 €
You save 11% (54,15 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

No hay mejor forma de disfrutar de una peli, un libro o de simplemente tomarse un descanso que en una silla reclinable. Este sillón reclinable tiene un mecanismo de ajuste de palanca para cambiar de postura fácilmente. El asiento reclinable también posee una base de madera que, equipada con una otomana, proporciona un soporte corporal completo mientras te relajas o ves la tele. Además, la base de madera garantiza que no resbalará y protege la superficie del suelo de arañazos. La duradera tapicería de cuero de PU ofrece el confort definitivo y facilita su limpieza y mantenimiento cotidianos. Este juego de silla reclinable es perfecto para casa y también es un gran aporte para la oficina.

  • Color: Negro
  • Material: Cuero sintético, PVC, madera curvada
  • Dimensiones totales: 81 x 88 x 109 cm (largo x ancho x alto)
  • Dimensiones del asiento: 55 x 56 x 45 cm (largo x ancho x alto)
  • Dimensiones del taburete: 49 x 52 cm (largo x ancho)
  • Altura del reposabrazos desde el suelo: 55 cm
  • Incluye reposapiés
  • Requiere montaje: Sí
  • La entrega contiene:
  • 1 x Silla reclinable
  • 1 x Reposapiés
  • Capacidad de carga máxima: 110 kg

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.