Skip to product information
  • Vetonek Sofá cama con cajones sin colchón roble Sonoma 90x200 cm

Sofa bed with drawers without mattress oak Sonoma 90x200 cm

212,70 €
212,70 € 239,39 €
You save 11% (26,69 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This 2 in 1 sofa with drawers, which serves as a sofa and bed, is a practical and striking complement to your living room or bedroom. Versatile bed sofa: the sofa bed works as a sofa during the day and becomes easily a double bed at night taking out the nest bed, which provides a practical solution to receive guests and maximize the space. Ample storage space: This guest bed has 3 drawers with wheels that provide ample space to store clothing, socks, toys, cushions, etc. Solide Construction: This sofa bed has a robust engineering wood robust structure. Engineering wood is of exceptional quality with a smooth surface and has strength, stability and moisture resistance. Useful information: Keep in mind that delivery includes only a bed structure. The mattress is not included. You can take a look at our store to look for the corresponding mattress.

  • Color: Sonoma oak
  • Material: Engineering Wood
  • Total dimensions: 203 x 93 x 65 cm (length x width x high)
  • Adequate mattress size: 90 x 200 cm (width x long) (mattress not included)
  • Dimensions of the bed drawer (each): 65 x 43 x 17 cm (length x width x high)
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x sofa
  • 3 x bed drawers

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.