Skip to product information
  • Vetonek Soporte para monitor madera maciza de pino 70x27,5x15 cm

Soporte para monitor madera maciza de pino 70x27,5x15 cm

38,16 €
38,16 € 38,16 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este clásico soporte de madera para monitores, con un diseño minimalista, añade un bonito toque a la casa. Madera de pino maciza: La madera de pino maciza es un bonito material natural. La madera de pino tiene vetas rectas, y los nudos dan al material su distintivo aspecto rústico.Estructura estable: La estructura de madera de este soporte para ordenador garantiza su solidez y estabilidad.Espacio de almacenamiento: Las 4 ranuras de almacenamiento en el lateral del soporte del monitor del ordenador y el espacio bajo el elevador del monitor te permiten guardar el teclado, el reproductor de DVD, la consola de juegos, los receptores, los soportes multimedia, los ordenadores portátiles, los bolígrafos y otros objetos similares.Función de reducción del estrés: Este soporte para teclado puede utilizarse como elevador para tu monitor de escritorio y otros dispositivos multimedia. Al elevar tu pantalla, reducirás la tensión en el cuello y la espalda. Nota:Cada producto viene con un manual de montaje en la caja para facilitar el montaje.

  • Material: Madera maciza de pino (sin tratar)
  • Dimensiones: 70 x 27,5 x 15 cm (ancho x profundo x alto)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.