Skip to product information
  • Vetonek Mueble para TV con luces LED negro 30,5x30x102 cm

TV furniture with black LED lights 30.5x30x102 cm

68,62 €
68,62 € 77,23 €
You save 11% (8,61 €)
Tax included. Shipping calculated at checkout.

Description

With a modern and practical design, this TV furniture with LED lights will become the center of stay of the stay. Durable material: engineering wood has exceptional quality and a smooth surface, and also has strength, stability and moisture resistance. Made of engineering wood, this TV support is robust and lasting. : This furniture has RGB LED lights, with different menus to change the color of the lights and allow the color to adjust automatically. Wall design: This furniture can be hung on the wall to get extra storage space. In this way, you can maximize the space on the ground and keep the area clear. Useful information: screws and tacos for the interior of the wall are not included. We recommend finding and using adequate screws and tacos specifically for the walls. If you are not sure, you can consult with a professional. Read and follow every step of the instructions. The product has a USB connector that needs a certified USB supply source of 5 V (not included).

  • Color: black
  • Material: engineering wood, glass
  • Dimensions: 30.5 x 30 x 102 cm (length x width x high)
  • Requires assembly: Yes
Do not use this article if any component is broken, torn or foul. This product works with 5 V CC, but the 5 V certified USB supply source is not included. High voltage can cause overheating and can cause damage to the device and the potential risk of overheating and fire.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.