Skip to product information
  • Ubbink Tratamiento de agua de estanques Aqua Clear Plus 250 ml 5000 l

Ubbink Tratamiento de agua de estanques Aqua Clear Plus 250 ml 5000 l

25,70 €
25,70 € 28,92 €
You save 11% (3,22 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

El tratamiento para agua de estanques Aqua Clear de la marca Ubbink es un producto líquido para cuidar el agua del estanque que ayuda a recuperar el agua clara del estanque rápidamente. Agente beneficioso para el agua de estanque: A menudo, la belleza del estanque del jardín se ve reducida por el agua turbia y verde que crece en este biotopo, especialmente durante los primeros días cálidos de la primavera, debido a la falta de equilibrio biológico. Con Aqua Clear Plus, el estanque volverá a tener un agua clara y de calidad rápidamente.Práctico frasco de 250 ml: Experimenta la alegría de un estanque cristalino que cautiva con su claridad, permitiéndote ver el cautivador baile de los peces y el suave vaivén de las plantas acuáticas. Aclarar el agua del estanque es pan comido con esta práctica botella de 250 ml. Información útil:Se recomienda tomar las medidas adecuadas y, sobre todo a largo plazo, para mantener el equilibrio biológico en el agua del estanque. Utilizar 50 ml por m³ para la dosificación y diluir en un cubo o regadera para una distribución uniforme en el agua del estanque.

  • Capacidad: 250 ml
  • Uso: 12,5 ml/250 L de agua de estanque
  • Restaura rápidamente la claridad del agua

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.