Ubbink Water treatment for pond kh+ 500 g for 5000 l

28,11 €
28,11 € 31,64 €
You save 11% (3,53 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Immerse yourself in a world of crystalline perfection for ponds with water treatment for Aqua Kh+ ponds 500 g of ubbink! Tell goodbye to imbalances and hello to a harmonious aquatic refuge for your beloved fish. KH treatment solution: Aqua KH+ in the form of granules helps increase the general hardness of water carbonate; It is based on mineral salts and trace elements to stabilize the pH by reducing the harmful effect of many toxic substances (eg heavy metals) in the water. Balanced pond: the ideal value of KH is between 5 ° DKH and 8 dkh; Below 4th DKH, the value of the pH fluctuates and is a risk to fish health; Above 8 ° DKH, the water responds allyingly. Compete the low kh values: a value that is too low KH is harmful to filtration of the pond water and the development of plants and fish with risk of instability of the pH; The supply of bacteria and minerals (calcium, magnesium) for fish could be interrupted. Useful information: 25 g per m³ Increases the value of DKH in 1 unit for 24 hours. Rainwater and drought conditions naturally reduce the value of Kh.

  • Content: KH treatment agent of granules pond
  • It helps increase the hardness of Kh water carbonates
  • Quantity: 500 g

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.