Ubbink Wolga stainless steel waterfall segment
Description
The Ubbink Wolga waterfall, a modular cascade for ponds, consists of three segments available separately, allowing you to make various combinations to fit in the available space and according to your preferences. This segment is a left corner that can add to your Ubbink Wolga waterfall. Thanks to its modern design, the stainless steel segment for the Ubbink Wolga waterfall will create an extraordinary aquatic element that will embellish the landscape of its garden. It is totally suitable for garden ponds, streams, etc. In addition, this segment for garden waterfall is easily mounted on a wall. It is also made of stainless steel 304, which guarantees many years of service and excellent durability. Get this waterfall for Ubbink ponds and dream of a gentle wave cascade in your own patio!
- Color: Silver
- Material: 304 stainless steel
- Dimensions: 48 x 48 x 4 cm (width x depth x height)
- Left corner segment for the Ubbink Wolga modular stream
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.