Wolfcraft Basic Tool Set to Place Rodapiés

104,02 €
104,02 € 117,07 €
You save 11% (13,05 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This basic tool game to place Wolfcraft rolle includes everything necessary to measure, cut and place plinths with precision. Practices Tools for Rodpiés: This package contains a box of bezels and groin, a Japanese mountain : You will also avoid the tedious task and prone to mistakes of transferring the correct angle to the Sierra. It measures corners from 85 to 180 ° comfortably using the two mobile arms. Automatic angle bisector party: In the second step, place the socket in the guides included and Sierra with the Sierra de Trasdós. The automatic angular bisector guarantees accurate gerges using the two guide pins. Cutting fácil: The Japanese Sierra has a removable sheet with teeth on both sides. It is ideal for cutting sockets with the bevel box and groin. When you pull it, the Japanese Sierra Short and allows you to cut finely and set easily. Easy and reliable with the gun to calafate mg 200.

  • Color: Gray, Green and Black
  • Material: Metal and plastic
  • Dimensions: 51 x 19 x 10.5 cm (length x width x high)
  • Bevel box and gerum:
  • 2 mobile arms to measure angles between 85-180 °
  • Integrated guide pins
  • Resistant and durable
  • Excellent design
  • Japanese Sierra:
  • Fine 240 mm flexible saw leaf with teeth on both sides
  • 1 side for cross cuts: 17 teeth per inch, pointed and accurately rectified
  • 1 side for longitudinal cuts: 8 teeth per inch, straight and rectified with precision
  • Long and ergonomic removable mango, version 2c
  • Gun to calafate:
  • To clean the rolle with construction adhesive
  • 130 kg of thrust pressure to throw the adhesive, silicone and acrylic from 310 ml cartridges easily
  • The rotating grip sleeve allows the turn at the best work angle
  • 2 component ergonomic mango
  • Semi -abroad exterior
  • Automatic anti -tote function
  • The delivery contains:
  • 1 x Bevel box and gerum
  • 1 x Japanese Sierra
  • 1 x gun to calafate mg 200

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.