Skip to product information
  • wolfcraft Sierra de corona de diamante Ceramic 35 mm 5926000

wolfcraft Sierra de corona de diamante Ceramic 35 mm 5926000

36,64 €
36,64 € 41,24 €
You save 11% (4,60 €)
Tax included. Shipping calculated at checkout.

Description

La sierra de corona de diamante Ceramic de wolfcraft, con su diámetro de 35 mm y 45 mm de profundidad de corte, es perfecta para la instalación y las tareas de fontanería para los aficionados y profesionales. Esta sierra de diamante con un revestimiento de cerámica ha sido diseñada para destornilladores inalámbricos y viene equipada con un taladro de centrado, por lo que no hay necesidad de herramientas adicionales de perforación. El borde de la sierra está recubierto con diamantes industriales de calidad que perforan incluso los materiales más duros, y la esponja incluida ayuda a enfriar el dispositivo con agua, lo que aumentará la vida útil de la sierra de diamante y evitara la formación de polvo. La entrega incluye 1 taladro de centrado, 1 esponja y 1 caja de almacenamiento para facilitar el transporte y almacenamiento. TENGA EN CUENTA: Mantenga siempre el área mojada durante el funcionamiento, para obtener un corte suave y prolongar la vida útil de la herramienta.

  • Color: Gris
  • Material: Metal
  • Diámetro: 35 mm
  • Profundidad de corte: 45 mm
  • Diámetro de la caña: 10 mm
  • Velocidad máxima: 500 rpm
  • Con revestimiento cerámico
  • Para destornilladores inalámbricos
  • Para baldosas, gres fino, placas de granito, baldosas acristaladas
  • Para trabajo de precisión
  • No requiere herramientas de perforación adicionales
  • El borde de la sierra está recubierto con diamantes industriales de calidad
  • La entrega incluye:
  • 1 x Taladro de centrado (5913000)
  • 1 x Borrador
  • 1 x Caja de almacenamiento

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.