Skip to product information
  • Vetonek jardinera de gaviones de acero 90x50x100 cm

90x50x100 cm steel gavionera

73,42 €
73,42 € 82,64 €
You save 11% (9,22 €)
Tax included. Shipping calculated at checkout.

Description

Our gavioner gardener presents a useful way to create a robust but elegant edge for a bed of flowers or plants in your garden or in your patio. The robust gavion has been designed to fill with rocks or gravel. Made of stainless galvanized steel and weather -resistant, the elevated gardener is very stable and durable. The mesh rack is formed by welding transverse and longitudinal wires at each intersection for greater stability. Keep in mind that stones and plants are not included in delivery.

  • Color: Silver
  • Material: Galvanized steel
  • External dimensions: 90 x 50 x 100 cm (length x width x height)
  • Internal dimensions: 70 x 30 x 100 cm (length x width x height)
  • Wall thickness: 10 cm
  • Mesh dimensions: 10 x 5 cm (long x width)
  • Wire diameter: 3.5 mm
  • Great load capacity
  • Load capacity: 1400 kg/m³
SPECIAL NOTE: Make sure the gav is securely placed. Depending on the use to be given to the gav, you must set it to the ground by placing the bottom in concrete or using posts or hooks according to the instructions of our manual. Read the instructions carefully and keep them for future consultations. Important: a full gav is very heavy and, if it turns, it can cause dangerous situations and serious injuries. The installation can only be carried out by professionals. You will also need help for assembly and installation, such as posts, screw flanges, hooks and concrete to mount the gavions, which are not included in delivery. The following knowledge is required for the construction of gavions: safe handling of tools, machines, stairs and scaffolding. Knowledge of occupational and operational security, as well as the adoption of precautionary measures against accidents and hazards. Experience in transport and manipulation of heavy and bulky components. Knowledge of local construction regulations. - In case of doubts or if you do not have the previous qualifications, consult a specialist, a certified engineer or contact a competent installation company. WARNING: Gavions should be installed only on sufficiently stable surfaces and according to installation instructions. Use safety footwear and protective gloves during installation! Attention! Metal wires can be pointed and have sharp edges! Attention! Danger of falling during installation! Dangers should be evaluated and protection measures should be taken before installation. - The above warnings are not exhaustive and should not be taken as a substitute for the realization of a complete risk assessment before the installation of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.