Skip to product information
  • Vetonek Juego de funda nórdica algodón azul 240x220 cm

Juego de funda nórdica algodón azul 240x220 cm

33,24 €
33,24 € 33,24 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este juego de funda nórdica es suave y cómodo, y añade un toque agradable al dormitorio. Material confortable: Este juego de cama está hecho de 100% algodón, un material fácil de mantener que es suave y cómodo.Aspecto elegante: Esta sábana nórdica tiene un gran tacto y aspecto, con textura añadida para dar al dormitorio un plus de estilo y elegancia.Norma 100 de OEKO-TEX: El conjunto está hecho en la fábrica de la norma 100 de OEKO-TEX, un sistema de certificación independiente que garantiza la calidad.Fácil de limpiar: El juego de funda de edredón y funda de almohada es fácil de limpiar en la lavadora.Durabilidad: Esta funda de edredón se caracteriza por su larga durabilidad para que dure años con una mejor resistencia a la decoloración y a las manchas.

  • Color: Azul marino
  • Material: 100% algodón
  • Dimensiones de funda de edredón: 240 x 220 cm (ancho x largo)
  • Dimensiones de la funda de almohada: 60 x 70 cm (ancho x largo)
  • Cierre con botón oculto
  • Resistente a las arrugas
  • Tejido ligero con una suavidad excepcional
  • Un aspecto intemporal
  • Combina perfectamente con la decoración del entorno
  • Fácil de cuidar
  • Lavado a máquina en caliente, sin lejía, secado en secadora a baja temperatura
  • Norma 100 de OEKO-TEX
  • La entrega incluye:
  • 1 x Funda nórdica
  • 2 x Fundas de almohada

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.