Skip to product information
  • Vetonek Manta con peso con funda tela gris 150x200 cm 7 kg

Manta con peso con funda tela gris 150x200 cm 7 kg

85,41 €
85,41 € 96,12 €
You save 11% (10,71 €)
Tax included. Shipping calculated at checkout.

Description

¿Problemas para dormir por la noche? Esta manta con peso produce una presión suave y cómoda que ayuda a tu cuerpo y mente a encontrar el descanso que necesita. Tejido cómodo: El tejido de algodón posee un aspecto limpio, es suave al tacto, transpirable y duradero.Relleno suave: La manta está rellena con una combinación de fibras de poliéster y perlas de vidrio inodoras.Distribución uniforme del peso: La manta con peso está diseñada para simular el 10 % de tu peso corporal. Los compactos bolsillos acolchados distribuyen el peso por todo el cuerpo de manera uniforme.Funda extraíble: Un lado de la funda está hecho de tela de hilo corto y el otro lado está hecho de tela cepillada. Puedes quitarla para mantenerte fresco en el verano y usar la funda para mayor calidez durante el invierno.Prácticos bucles internos: La manta relajante con bucles internos se puede asegurar a su funda.

  • Color: Gris
  • Material exterior de la manta: Tela (100% algodón)
  • Material de relleno: Poliéster, perlas de vidrio hipoalergénicas, no tóxicas e inodoras
  • Material de funda: Tela (100% microfibra de poliéster cepillado)
  • Dimensiones: 150 x 200 cm (ancho x largo)
  • Dimensiones de retazo: 10 x 10 cm (largo x ancho)
  • Peso: 7 kg
  • La entrega incluye:
  • 1 x Manta
  • 1 x Funda

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.