Skip to product information
  • Vetonek Alfombra de sisal natural 100x100 cm

100x100 cm natural sisal carpet

67,66 €
67,66 € 76,15 €
You save 11% (8,49 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This Sisal carpet, which provides a feeling of beautiful texture, is an excellent option for almost any room in your home. First quality material: This Sisal carpet is made 100 % of SISAL, which makes the carpet is lasting and versatile. In addition, Sisal's carpets have an extremely positive effect on the inner climate, since they absorb the moisture of the air and release it again when necessary. Non -slip function: The backdate antislizing maintains the carpet of the ground in its place and reduces the probability Sliding, making the carpet is suitable for several surfaces. Facil of maintaining: due to the natural property of the sisal, the carpet does not attract dust or dirt too much. Therefore, using a vacuum cleaner can maintain the original beauty of the inner carpet. Note: The carpet is packed to facilitate transport. Please give the product some time to become perfectly straight and flat. This carpet should not be placed in the sun or expose yourself to excessive humidity. If you cannot do the cleaning, enter specialized professionals. bleach, dry or iron.

  • Color: natural
  • Material: 100% sisal
  • Dimensions: 100 x 100 cm (width x long)
  • Total weight: 2000 g/m²
  • Adequate for interior use
  • With non -slip latex support
  • The ends of the carpet are bent and glued with adhesive tape
  • Required assembly: no

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.