110 cm wood folding sled

84,67 €
84,67 € 95,30 €
You save 11% (10,63 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This folding wood sled will offer you an exciting experience this winter. Metal, long and durable skates offer soft slip even on the most pronounced slopes. Resistant material: the sled is made of wood so it is light as it is strong, something important when you have to drag it up hill. Safe treatment: Thanks to the safety block, the snow sled is very stable and safe. : The intelligent folding mechanism allows us to fold it in a few seconds without the need for tools. It is also easy to keep and transport. It is to throw: it has a rope to throw, so that adults tow the children in flat and snowy soils or to enjoy a softer slope walk.

  • Color: Beige and Red
  • Material: wood, HDPE (high density polyethylene), metal
  • Seat length: 110 cm
  • Dimensions: 119 x 37 x 22.5 cm (length x width x high)
  • Long metal skates for a supervid descent
  • Complete with rope to throw
  • Maximum user weight: 80 kg
  • It does not require assembly
  • WARNING: Not suitable for children under 36 months.
  • WARNING: It must be used under the direct supervision of an adult.
  • WARNING: Protection equipment should be used. Do not use in traffic.
User maximum weight warning of 50 kg. Not suitable for children under 3 years. It requires the assembly of an adult. Warning. Use under the direct surveillance of an adult. Warning. Protection equipment should be used. Do not use it in traffic. Long rope Danger of strangulation! Warning. Not suitable for children under 3 years. Long cable. Danger of strangulation. An adult supervision is required. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.