27 pieces of 27 pieces rattan natural
Description
This stylish and functional sofa will be an ideal piece in your living room or your inner terrace! The structure is covered with natural ration, which is not only attractive with its natural image and touch as well as its undulating patents, but it is also very durable. The sofa legs are made of high quality mahogany wood. The cushions add additional comfort and a cozy feeling. The assembly is easy. The whole set will add a rustic touch to your living area! Shipping includes 3 corner sofa segments, 3 center sofa segments, 1 Ottoman, 1 center table, 6 seat cushions, 9 backup cushions, 1 otomana cushion and 3 pillows.
- Synthetic ratan color: Brown
- Cushion color: cream
- Structure material: natural rattan + mahogany wood
- Cushion material: foam fabric
- Dimensions of the corner sofa: 67 x 67 x 58 cm (wide x high x high)
- Dimensions of the central couch: 67 x 67 x 58 cm (wide x high x high)
- Dimensions of the Ottoman: 67 x 67 x 27 cm (length x width x height)
- Dimensions of the coffee table: 47 x 47 x 27 cm (length x width x height)
- Lasting and sustainable
- To use exclusively inside the house
- Easy assembly
- Delivery includes:
- 3 x corner sofa segments
- 3 x central sofa segment
- 1 x Ottoman
- 1 x center table
- 6 x seat cushions
- 9 x rear cushions
- 1 x Ottoman Cojin
- 3 x pillows
- Material: cotton: 80%, polyester: 20%
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.