Skip to product information
  • Vetonek Estructura de cama sin colchón cuero sintético gris 160x200 cm

Bed structure without mattress synthetic leather Gray 160x200 cm

201,94 €
201,94 € 227,27 €
You save 11% (25,33 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Get a more repairing dream with this bed structure with headboard! It is a cozy contribution for any bedroom. Durable material: top quality synthetic leather is a very durable material. It is stain resistant, so it is easy to clean with a damp cloth. In addition, the smooth surface gives a luxurious appearance and the beauty of the authentic leather. SUPPORT PATS: The bed relies on robust legs, which guarantee their stability, safety and firmness. Robust lists: the plywined wooden slats provide a good distribution of the distribution of the Weight, which guarantees that the matt television. Wavy lateral design: the wavy look of the bed structure is elegant and sophisticated, adding a modern and elegant touch to your decoration, making it the focus of attention of your bedroom. Useful information: The mattress is not included with the bed. We have a varied selection of mattresses. You can take a look at our store to look for the corresponding mattress.

  • Gray
  • Material: Synthetic leather (75% polyvinyl chloride, 5% cotton, 20% polyester), metal, solid pine wood, plywood wood
  • Total dimensions: 218 x 165 x 74.5 cm (length x width x high)
  • Compatible mattress size: 160 x 200 cm (width x long) (mattress not included)
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.