Skip to product information
  • Vetonek Piscina hinchable Fast Set con bomba 396x84 cm

Fast Set Set Swimpling with 396x84 cm pump

188,29 €
188,29 € 211,91 €
You save 11% (23,62 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Have fun in the patio with family and friends in the Vetonek Fast Set Set Set Pool. The elegant pool has reinforced walls that are made of tritech, a 3 -layer reinforced material consisting of high strength laminated PVC and a polyester mesh. The exterior is designed with rattan print. This inflatable pool can be mounted quickly and easily. Simply place the pool on a flat surface, inflate the upper ring and then fill the pool with water. You can connect the hose with the adapter included and drain the water easily. The 2006 L filtered pump and the replaceable cartridge are also included in the supply.

  • Gray
  • Material: PVC
  • Dimensions: 396 x 84 cm (high diameter)
  • Capacity (80%): 7340 L (1939 gal)
  • Cartridge pump: 2006 l/h (530 gal/h)
  • Outdoor wall with rattan print
  • The lining is backed by an inflatable ring at the top
  • Building control drainage valve built -in
  • Underwater adhesive repair patch
  • Easy to mount and disassemble
  • Requires assembly: Yes
  • Vetonek article number: 57376
  • Delivery contains:
  • 1 x pool
  • 1 x filtering pump
  • 1 x replacement cartridge
  • 1 x Repair patch
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.