Skip to product information
  • Vetonek Tumbonas con sombrilla aluminio negro

Black aluminum umbeons

216,40 €
216,40 € 243,55 €
You save 11% (27,15 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This locking set, with an elegant design and that includes a practical umbrella and will become the center of attention of your garden or patio. Made of high quality textilene, this locks set is suitable for outdoor use throughout the year. Thanks to its ergonomic design that adapts to the natural contours of your body, you will feel very comfortable when you go to bed on aluminum sun loungers. The support can be adjusted in 5 different positions, offering additional comfort to lie down. And since the aluminum frame is lightweight, sun loungers are easy to move. The aluminum structure with powder coating provides a lot of stability and ensures that the chairs have excellent durability. Textilene resistant to weathering and waterproof makes beach chairs easy to clean. The umbrella, which has a robust steel structure with dust coating, a large UV resistant awning and a stable cross -shaped base, will be ideal to protect from UV rays and rains while relaxing with your family in the garden , or patio. This aluminum sun lounger set is the perfect combination of style and functionality. Note: We recommend covering the chairs in rain, snow and frost conditions.

  • CAUBLONS:
  • Powder coating resistant structure
  • Chair dimensions: 156 x 60 x 89 cm (length x width x high)
  • Height adjustable support (a total of 5 positions)
  • Outdoors
  • Parasol:
  • Upex height: 1.9 m
  • Upex diameter: 1.8 m
  • Post diameter: 22 mm
  • Structure material: Powdered steel
  • Fabric: 100% polyester
  • Resistant to UV and waterproof rays
  • With 8 resistant rays
  • With a removable cross -shaped base
  • The delivery includes 2 beach chairs and 1 umbrella
  • Material: Polyester: 30%, PVC: 70%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.