Skip to product information
  • Vetonek Revestimiento de estanque negro 1x6 m PVC 0.5 mm

Black pond coating 1x6 m PVC 0.5 mm

50,78 €
50,78 € 57,16 €
You save 11% (6,38 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This pond coating is an excellent base to build your personal pond system in your garden or anywhere in your property. The pond coating is manufactured with top quality PVC, very elastic and tear resistant, suitable for the design of shallow and deep water areas, and harmless for plants and animals. The lower layer of the pond can be easily cut with scissors. The glue or welding with PVC tail (polyvinyl chloride) can also be done without difficulty. Enjoy creating your small corner of relaxation on the ground and on the floor to distract you from the stressful day to day. No important: 1. Before placing the lining of the pond, make sure the surface is dry and free of ice, snow, stones and other hard or sharp objects to avoid cuts, blows and damage. 2. You can use the following formula to calculate the size: length of the pond lining: talled pond length + twice the depth + twice the overlapping of the edge*width of the lining of the pond double ** Recommended minimum overlap of 0.10 mse recommends buying extra meters to compensate for error and give enough lining to hold around the edges above the maximum water level. 3. We recommend the use of an adequate ponded fleece under the pond sheet. The main function is the distribution of the load and the lower mechanical load associated with the lining of the pond.

  • Color: black
  • Material: PVC
  • Dimensions: 5 x 6 m (width x long)
  • Thickness: 0.3 mm
  • Unitary weight: 600 g/m²
  • Static drilling according to ISO 12236
  • Tear resistance according to DIN 53363
  • Suitable for fish, harmless to plants and animals
  • UV resistant, welded seams and cold
  • Swelling, peeling and aging resistance
  • Highly elastic and tearing resistant
  • Required assembly: no

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.