Skip to product information
  • Vetonek Rebotador de fútbol ajustable acero negro 84x73x60-80 cm

Black steel adjustable football rebound 84x73x60-80 cm

68,66 €
68,66 € 77,27 €
You save 11% (8,61 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Improve your football skills with this soccer rebound! Durable material: The rebound network is made of polyester. Polyester is a synthetic material known for its resistance to UV rays and elastic resistance. The polyester is water resistant, so the perfect choice for wet or rainy conditions is easily cleaned. Resistant Structure: The steel structure with powder coating provides stability and solidity to the rebound network and guarantees a long Useful life. Adjustable angle: The rebound objective allows you to adjust the angle to meet the different training requirements. And contains stability anchors that prevent them from turning when it is in use. Portable design: the rebound network is light and can be folded, so you can take it anywhere, for example, in the sports club, school, the school, the school Garden and the backyard. DIVERSE USES: It is applicable for soccer, baseball and basketball training. It can be used for a variety of exercises to improve response capacity, hand-fo-eo coordination, kick, catch, pass, throw and hit.

  • Color: black
  • Structure material: powder coating steel
  • Network material: polyester
  • Dimensions: 84 x 73 x 60-80 cm (length x width x high)
  • Tube diameter: 28 mm
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.