Skip to product information
  • Vetonek Silla mecedora de jardín acero y textilene negro

Black Steel and Textilene Garden Garden Chair

137,60 €
137,60 € 154,87 €
You save 11% (17,27 €)
Tax included. Shipping calculated at checkout.

Description

The garden rocking chair allows you to swing gently while sunbathing, sleeps or rests. It will turn your patio, terrace or garden into a relaxation oasis. You can relax body and mind and disconnect from the rush of daily life while resting in this comfortable rocking. The robust frame is made of high quality steel, while the reclining area is made of durable textile cloth, which is resistant and easy to clean. The durable chair can support up to 100 kg. With 2 adjustable reclining levels, you can always find the most comfortable position. Thanks to its light structure and its folding design, this rocking chair can be easily folded to save and transport it. You can take it with you to the beach, the campsite, to the park or to a show.

  • Material: Steel Structure + Textilen tissue
  • Color: black
  • Dimensions (extended): 150 x 64 x 83 cm (length x width x high)
  • Dimensions (folded): 104 x 64 x 22 cm (length x width x high)
  • Reclining in 2 positions
  • Maximum weight capacity: 100 kg
  • Cojín included: Yes
  • Material: Polyester: 30%, PVC: 70%
Maximum 110 kg per seat.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.