Skip to product information
  • Vetonek Soporte de luces acero negro 238x115x(180-300) cm

Black steel light support 238x115x (180-300) cm

162,91 €
162,91 € 183,35 €
You save 11% (20,44 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This excellent and complete lamp support is intended to be the perfect assistant for any photographer of portraits, products, fashion, events, weddings and even for cameramen in a fixed or travel location. Multipurpose bridge: lighting support is a total solution to place light and effects technology. It can be combined with fun lighting tools such as LED spotlights to create an impressive scenario. Adjustable height: The height of these tripods can be adjusted flexible according to what you need and thus make sure you get optimal lighting. Stable and resistant structure: The lighting support steel structure guarantees its solidity. The tripod structure also reinforces the stability. Transportation as: the entire lighting support system can be installed and easily disassembled in order to save it and transport it in a practical way. Note: Each product comes with a mounting manual in the box to facilitate assembly.

  • Color: black
  • Material: Steel
  • Total dimensions: 238 x 115 x (180-300) cm (length x width x high)
  • Bar length in T: 100 cm
  • Support bridge dimensions: 100 x 27.5 cm (high x high)
  • Length between the leg legs: 115 cm
  • Length between the two supports: 100 cm
  • Maximum load capacity: 120 kg
  • Delivery includes:
  • 2 x tripods
  • 1 x support bridge
  • 2 x bars in t
  • Other assembly materials

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.