Blue Children's Game Store 102x102x82 cm

21,90 €
21,90 € 24,65 €
You save 11% (2,75 €)
Tax included. Shipping calculated at checkout.

Description

This beautiful game store is ideal to offer your adorable creature a space in which to entertain! Practical material: Polyester is a synthetic material known for its resistance to UV rays and elastic resistance. The polyester is water resistant, so it is the perfect choice for wet or rainy conditions, and it is also easily cleaned. Perfect design: as it has a beautiful appearance and a beautiful print, sure that this game store will become the favorite of children. In addition, the mesh design guarantees that the tent is safe and ventilated. Without a doubt, your little one will worship spend this lovely store. Do not be used, the children's store can be easily stored in the transport bag included. Note: Each product comes with a mounting manual in the box to facilitate assembly.

  • Color: blue
  • Material: polyester, steel
  • Dimensions: 102 x 102 x 82 cm (length x width x high)
  • With a transport bag
  • Delivery does not include toy balls
  • WARNING: Not suitable for children under 36 months.
  • Warning: only for domestic use.
Warnings: Warning: only for domestic use. WARNING: It is not convenient for children under 36 months. Long rope Danger of strangulation! Keep away from fire. Toys must be mounted by an adult. WARNING: Use under the direct surveillance of an adult. WARNING: Keep away from fire. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.