Blue Retractile and White Manual awning 300 cm

108,29 €
108,29 € 121,88 €
You save 11% (13,59 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This retractable awning will be ideal for use in front of the window, on the terrace, the balcony or in your garden. This water repellent and dirt and weather resistant and UV rays is made of high quality polyester with a PU coating. The strong steel structure makes robust and durable awning. The easy -to -clean polyester awning can be removed and washed. This product can not only be used as a normal awning, but also for the window completely. Thanks to the crank, this awning is retractable. The crank to raise and lower the awning can be placed on the left or right. The height and angle of the awning can also be adjusted. The assembly is easy. This awning is a perfect option for the outdoor space of your house and can be used manually.

  • Color: Blue and White
  • Material: Fabric with PU coating and steel structure
  • Width: 300 cm
  • Maximum projection: 120 cm
  • Flexible installation height: 200-300 cm
  • Support bar diameter: 16 mm
  • Screw length: 125 cm
  • Manually operated
  • Repeals water and dirt
  • High Light Resistance
  • Easy assembly
  • Material: Polyester: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.