Skip to product information
  • Vetonek Kit de cuidado para muebles de jardín de ratán y textilene

Care Kit for Garden and Textilene Garden Furniture

26,78 €
26,78 € 30,14 €
You save 11% (3,36 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This multifunctional furniture care kit for Ratán, Textilene and Wicker is specially developed for the maintenance of our garden furniture with the combined effort of our research and development team and our suppliers. It is undoubtedly essential for your garden furniture! With this Ratán cleaner, you can easily eliminate dirt, fat and other spots from your outdoor furniture. It also keeps them clean and beautiful in all conditions and guarantees a long useful life. More importantly, the detergent uses natural enzymes and enzymes to oxygenate the bubbles that break down dirt. This is completely harmless for both people and the environment. In addition, the garden furniture cleaner is also suitable for plastic cabinets, plastic interior furniture, exterior furniture, aluminum and glass.

  • Sponge dimension: 9 x 5 x 1.5 cm (length x width x thickness)
  • Quick cleaning capacity: 250 ml
  • Ultra Clean Capacity: 250 ml
  • Quick cleaner with spray nozzle
  • Ultra cleaner with spray nozzle
  • Bottles with colored labels, tapas and insert tapas
  • Adequate for plastic cabinets/plastic interior furniture/outdoor furniture
  • Includes instruction manual
  • Delivery includes:
  • 1 x fast cleaner
  • 1 x ultra cleaner
  • 1 x draft
  • 1 x instruction manual
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.