Skip to product information
  • Kit de cuidado textil CARE KIT 2x250 ml

Care textile care kit 2x250 ml

16,26 €
16,26 € 18,30 €
You save 11% (2,04 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This unique and complete set of furniture care products contains 2 specialized products for optimal cleaning and protection of new and used furniture fabrics. The textile protection set maintains new furniture in optimal conditions and gives used or dirty furniture a second life. The textile protector causes new and newly clean textile furniture to be optimally resistant to spots and water. Contaminants are no longer absorbed directly on textile fiber and can be easily removed with a paper cloth or scarf. Textile protector optimally protects the furniture fabrics against red wine spots, coffee, drinks, ketchup, etc. The fabric cleaner, as a delicate water -based cleaner for most fabrics, is easy to apply. It is presented in the form of cloths soaked with the cleaner fluid, except the general use cleaner, which comes in a bottle. You can clean upholstery fabrics and deep spots on the fiber, as well as rebel spots on furniture upholstery, carpets, food and drinks, etc. In addition, it can be used in all types of textiles! Not only is it ideal for furniture to sit, but it is also suitable for carpets, curtains, garden cushions, car upholstery, etc.

  • Microfiber cloth size: 17 x 15 cm (length x wide)
  • Cleaner Capacity: 250 ml
  • Protective Capacity: 250 ml
  • Cleaner with tapas and under the tapas.
  • Spray pump protector
  • Boats with colored labels.
  • With manual instruction brochure.
  • Delivery contains:
  • 1 x cleanser liquid
  • 1 x liquid protector
  • 1 x manual
  • 1 x microfiber cloth
  • accessories

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.