Skip to product information
  • Vetonek Estructura de cama infantil de madera maciza de pino 80x160 cm

Children's Bed Bed Structure 80x160 cm

114,35 €
114,35 € 128,70 €
You save 11% (14,35 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Create the definitive hiding place in your children's bedroom with our fantastic wooden bed structure! The bed has a novel cross structure inspired by the great typis stores where you can hang curtains so that your child has intimacy. It can also be used as a reading corner or a house of games for your child. Made of solid pine wood, this bed structure is very robust and lasting. The strong ribbons offer the necessary support and are very comfortable. This bed structure is suitable for a mattress of 80 x 160 cm. Keep in mind that delivery includes only a bed structure. The mattress and the curtains are not included. The bed is easy to ride. You can check the matching mattresses.

  • Material: Pine solid wood structure + plywood slats
  • Total dimensions: 168 x 86 x 146 cm (length x width x high)
  • Adequate mattress size: 80 x 160 cm (width x long) (mattress not included)
  • WARNING Not suitable for children under 4 years.
Warning not suitable for children under 4 years. WARNING. Do not place this children's bed near heat sources, windows and other furniture. WARNING. Do not use this children's bed if any piece is broken, torn or missing. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.