Skip to product information
  • Vetonek Juego de mesas de comedor 7 uds madera maciza de acacia y mango

Dining Table Set 7 UDS Maciza Wood of Acacia and Mango

1.214,50 €
1.214,50 € 1.366,89 €
You save 11% (152,39 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This set of solid wood table and chairs will be a distinctive contribution to your living room. The table is made of solid acacia wood and high quality mango and the chairs are made of solid high quality acacia wood. Acacia is a tropical hard wood, which is outdoors and lasting. Mango wood is stable and beautiful. This dining table is made completely by hand. Each step of the process is carried out with greater care, both polishing and painting or lacquered. The crafts and the beautiful veins of the wood make each piece of furniture unique and slightly different from the rest. The robust surface will be ideal to place food, drinks, lamps or other decorative items. The exquisite steel legs provide robustness and a romantic design. The delivery includes 6 chairs that combine with our elegant and modern table. The assembly is easy. Important note: Colors can vary from one piece to another, so each of our dining board games is unique. Delivery is random, which guarantees the exclusivity and individuality of the product.

  • Table material: solid acacia and mango wood + steel legs with powder coating
  • Chair material: solid wood of acacia
  • Table dimensions: 180 x 90 x 76 cm (length x width x high)
  • Chair dimensions: 43 x 43 x 104 cm (wide x high x high)
  • Seat height from the floor: 45 cm
  • Polished, painted and lacquered
  • Easy to ride
  • Max. Load capacity (per seat): 110 kg
  • Delivery includes 1 table and 6 chairs
Maximum 110 kg per seat.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.