Elastic rope network Green PP 8x3.5 m

82,18 €
82,18 € 92,49 €
You save 11% (10,31 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Transport your load safely with this network for trailers! Durade material: The load network is made of polypropylene, so it is draining, UV rays, outdoo Contour, which guarantees a tight adjustment around the load and compatibility with various load spaces. Practice and functional: This network maintains your load in place, avoiding damage to the load and the car itself. It also keeps other drivers safe. Fácil Installation: The towing network cover is fast and easy to install. Just extend it on your load and the elastic rope will keep everything in its place. No complex nodes or additional tools are needed. Amlies uses: Mesh cover for trailers is versatile and can be used for various uses, such as trailers, trucks, SUVs and to holder.

  • Color: Green
  • Material: polypropylene
  • Dimensions: 8 x 3.5 m (length x wide)
  • Mesh dimensions: 45 x 45 mm (length x wide)
  • Rope thickness: 3 mm
  • Elastic rope diameter: 6 mm
  • UV and outdoors resistant

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.