Bathroom mirror with LED, touch sensor and 100x60 cm v39 clock
Description
Our LED bath mirror offers a bright light combined with a sophisticated style and a functional design. This mirror emits light from the edges that surround it, to create a pleasant atmosphere in the bathroom. With the LEDs, you will have a precise and clear image of yourself every time you look in the mirror and offer you the most authentic light to make up, clean and take care of your skin. You can light and turn off the light easily with the switch with a touch sensor. It has also been subjected to the tests corresponding to the IP44 degree to guarantee its total security in a humid environment. Our bathroom with LED offers a bright light combined with a sophisticated style and a functional design. This mirror emits light from the edges that surround it, to create a pleasant atmosphere in the bathroom. With the LEDs, you will have a precise and clear image of yourself every time you look in the mirror and offer you the most authentic light to make up, clean and take care of your skin. You can light and turn off the light easily with the switch with a touch sensor. It has also been submitted to the tests corresponding to the IP44 degree to guarantee its total security in a humid environment. In addition, the mirror has the time indicator so you can adjust your local time and better plan your time. The delivery includes 1 LED mirror, 1 adapter and assembly tools.
- Color: Silver
- Material: Glass, aluminum
- Dimensions: 100 x 60 cm (high x width)
- Operating voltage: 100-240 V
- Degree of protection: IP 44
- Normal power: 12 w
- Turn on/turn off the light with the sensor
- Includes clock
- Requires assembly: Yes
- Delivery contains:
- 1 x LED mirror
- Assembly accessories
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.