Exterior lamppings 3 stainless steel units 215 cm

276,05 €
276,05 € 310,69 €
You save 11% (34,64 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Illuminate your vexterior space with these outdoor foot lamps! IP44 classification: Thanks to its stainless steel body with IP44 classification, the outdoor foot lamp is outdoors, robust and lasting and, therefore, suitable for exterior use. With 3 heads: the outdoor lamppost comes with 3 heads with a diameter of 25 cm. Versatility: The elegant floor lamp for patio is versatile and can be used for a variety of outdoor lighting applications, such as illuminating your garden, entrance or porch, as well as to improve your outdoor decoration. Useful information: The bulbs are not included.

  • Color: Silver
  • Post material: stainless steel
  • Lamp screen material: PMMA
  • Dimensions: 16 x 16 x 215 cm (length x width x high)
  • Diameter of each lamp ball: 25 cm
  • Adequate (not included) bulb: maximum 60 w, E27
  • Tension: 220-240 V ~, 50 Hz
  • IP rating: IP44
  • Suitable for outdoor use
  • Delivery contains:
  • 3 x outdoor floor lamps
This device should not be used by children 14 years or less, or by people with reduced physical, sensory or mental abilities or lacking experience and knowledge about the use of electronic devices. Electricity is dangerous. Damages and installation, use or improper alteration (individual component substitution) can cause damage to the unit and the wiring of the electricity grid, which can cause an electric shock and endanger the user. Do not use this product in explosive atmospheres, as in the presence of flammable fluids, gases and powders, or at temperatures greater than 50 degrees Celsius. Do not turn on the product if the connection cable or the adapter are visibly damaged. Never open or enter anything into electrical accessories or equipment. Doing this kind of thing can cause a serious danger of death due to electric shock. Disconnect the power supply during installation and maintenance. Make sure the bulbs have cooled. This product is designed for outdoor use. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.