Skip to product information
  • Vetonek Piscina hinchable Fast Set serie Paradise Palms 457x84 cm

Fast Set Set Set Paradise Palms 457x84 cm

246,67 €
246,67 € 277,62 €
You save 11% (30,95 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Have fun playing and splashing in the house garden with the Fast Set inflatable pool of the Paradise Palms series of Vetonek! The elegant pool has reinforced walls of Tritech. It is a reinforced material with 3 layers, which consists of high strength laminated PVC and a polyester mesh. This inflatable pool can be mounted quickly and easily. You just have to place the pool on a flat surface, inflate the upper ring, then fill the pool with water. The palm tree inflates and spray water once connected to the garden hose. The water drain valve facilitates drainage just by connecting the valve to a garden hose (with the adapter included). The cartridge treatment plant is part of the circulation system to keep the water clean and prevents algae, mold and other microbial bacteria to grow in the pool.

  • Pool:
  • Color: Multicolor
  • 3 -layer side walls and high -resistance polyester
  • Dimensions: 457 x 84 cm (high diameter x)
  • Capacity (80%): 9677 L (2556 gal)
  • The lining is backed by an inflatable ring at the top
  • Tropical drawings on the pool wall
  • The inflatable palm pulverizes water when connected to the garden hose
  • Building control drainage valve built -in
  • Underwater adhesive repair patch
  • Easy to mount and disassemble
  • Filter pump:
  • Power: 220 - 240 V
  • Pump capacity: 2006 l/h (530 gal/h)
  • Vetonek article number: 57416
  • Delivery contains:
  • 1 x inflatable pool
  • 1 x filtering pump
  • 1 x cartridge
This device is not intended to be used by people (including children) with reduced physical, sensory or mental abilities or lacking experience and knowledge, unless they are supervised or have received instructions on the use of the apparatus by a person responsible person of your safety. This product is not a toy. Do not allow children to play with the device. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.