Skip to product information
  • FitPAWS Plataforma equilibrio perros Mini K9FITbone 2 uds 29x16,5x6cm

FITPAWS PLATFORM BALANCE Dogs mini k9fitbone 2 uds 29x16.5x6cm

99,38 €
99,38 € 111,85 €
You save 11% (12,47 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The FitPaws Mini K9fitbone Pet Balance Platform is an excellent accessory for your dog to exercise and improve its strength, balance and flexibility. The balance coach offers a fun way to train instability, and helps you link with your dog. With this training platform, you can teach new skills and strengthen the trunk and strength of your dog's body. Both small and large dogs can train their entire body in a fun way with the K9fitbone. The PVC material used is of professional quality, with a good grip, and resistant to the damage of dog nails. K9fitbone has sensory nodes for brain stimulation. The challenge can be adjusted by pumping less or more air. The pump is included.

  • Color: pink
  • Material: Plastic, PVC
  • Dimensions: 29 x 16.5 x 6 cm (length x width x high)
  • Improves the strength of the trunk and limbs
  • Improves coordination
  • Best joint health
  • Create a stronger link
  • Reduces behavior challenges
  • Senior strengthening
  • It generates trust
  • Upper grip made for dogs
  • Sensory bumps provide neuronal stimulation
  • Delivery includes:
  • 2 x equilibrium platforms
  • 1 x bomb
  • 1 x Exercise sheet

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.