Garden and table loungers 3 pieces white synthetic

479,71 €
479,71 € 539,91 €
You save 11% (60,20 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Create the attractive and relaxing hall with which you have always dreamed of this elegant lounge game and center table. You can enjoy a relaxing and sunny afternoon with your friend in the sun lounge! Made of ratán pe resistant to the weather, the couch is easy to clean, resistant and suitable for daily use. It has a robust steel structure with powdered coating, which makes the loravone perfectly stable and lasting. Both sides of the sunbed can be lifted and adjusted in different configurations for the most comfortable positions to sit or go to bed. Padded cushion densely provides maximum comfort and additional support. The cushion cover is removable to facilitate washing. You can even have drinks, your phone, books or other small items available to the auxiliary table included. Note: We recommend covering the sunbed and the table in rain, snow and frost.

  • Color: White
  • Cushion color: black
  • Material: Ratán PE, powder coating steel, cloth (100% polyester)
  • Louple dimensions: 195 x 60 x 31 cm (length x width x high)
  • Dimensions of the center table: 40 x 40 x 40 cm (length x width x high)
  • Both sides of the sun lumbons are adjustable
  • Outdoors
  • Easy to maintain
  • Requires assembly: Yes
  • Delivery includes:
  • 2 x sun lumbers
  • 2 x seat cushions
  • 1 x center table

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.