Garden Dining Set 3 Pieces Steel and Textilene Negro

260,45 €
260,45 € 293,13 €
You save 11% (32,68 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Relax and enjoy an adorable snack or food with your family and friends around this garden dining game! Durable material: Textilene fabric allows air to pass through and, in addition, is resistant to UV rays. This makes textilene ideal for warm climates. As strong and durable material, it is very resistant to tears, punctures and mold. Resistant and stable structure: Steel structures make the dining game resistant and stable to use outdoor daily. Practice Surface: The smooth surface From the dining table it is tempered glass that is easily cleaned with a damp cloth. In addition, it offers an excellent support to place food, drinks and decorative objects. Comfortable: the dining chair is designed with support and plates to offer you a comfortable seat. Note: To make sure that your outdoor furniture stays beautiful, we recommend protecting them with an impermeable case.

  • Chair:
  • Color: black
  • Material: Textilene, powder coating steel, WPC
  • Dimensions: 55 x 61.5 x 90 cm (wide x high x)
  • Seat height from the ground: 40 cm
  • Seat depth: 50 cm
  • Height of the floor from the ground: 65 cm
  • Backrest height from the seat: 50 cm
  • Maximum load capacity: 110 kg
  • Table:
  • Color: black
  • Material: powder coating steel, tempered glass
  • Dimensions: 80 x 80 x 74 cm (length x width x high)
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x table
  • 2 x chairs
Maximum 110 kg per seat.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.