Garden dining set 9 pieces and beige synthetic cushions

966,11 €
966,11 € 1.087,34 €
You save 11% (121,23 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our elegant synthetic ratan garden furniture game will become the focus of your garden or patio! This Ratán dining set has an elegant and modern design and will be an excellent option to dinner outdoors or relax in the garden. Made of ratán pe resistant to weather and water, the dining game is easy to clean, resistant and adequate for daily use. The steel structure with powdered coating make the table and the strong and robust seab chairs. The surface is made of glass, which facilitates cleaning. The 8 chairs are reclining thanks to adjustable support and restraint. When touching the side button, the backrest will be reclined. Thanks to its light construction, all articles are easy to move. The thick, soft and foam stuffed seat cushions, are very comfortable and are made of hydrophuge polyester. The cushion covers with zippers can be easily removed and washed. This garden furniture game includes 1 table, 8 chairs with gas elevation and 8 cushions. Note: We recommend covering the whole in rain, snow and frost.

  • Ratán color: beige
  • Cushion color: cream white
  • Material: Ratán Pe + Glass board + steel structure with powder coating
  • Cushion material: 100% polyester cover with foam filling
  • Table dimensions: 240 x 90 x 75 cm (length x width x high)
  • Dimensions of the chair (not reclined): 58 x 62 x 108 cm (wide x high x)
  • Dimensions of the chair (reclined): 58 x 90 x 91 cm (wide x high x)
  • Seat width: 42-47 cm
  • Seat depth: 47 cm
  • Seat height from the ground: 43 cm
  • Height of the headquarters from the ground: 67 cm
  • Cushion thickness: 4 cm
  • Removable cushion case
  • The chairs are reclining thanks to the adjustable support.
  • The delivery includes:
  • 1 x table
  • 8 x chairs
  • 8 x seat cushions
Maximum 110 kg per seat. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.