Skip to product information
  • Vetonek Mesa y taburetes altos de jardín 7 pzas madera maciza acacia

Garden Table and Taburetes 7 Pzas Maciza Acecia Wooden

516,82 €
516,82 € 581,67 €
You save 11% (64,85 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This wooden garden bar has an elegant design and is designed to be the focal point of your garden, patio or terrace. First quality material: Acacia solid wood is a beautiful natural material. Acacia wood is a tropical hard, dense, robust and lasting wood. In addition, the surface with oil finish facilitates the cleaning of the table and the garden chairs. Resistant and robust structure: the wooden frames of the exterior dining room guarantee robustness and stability.Comodes stools: the restspayes provide an extra comfort in the seats. Atemporal appearance: The elegant design of the Bistro de Madera Table and the stools make them a timeless investment for your home. Note: To prolong the life of your outdoor furniture, we recommend that you protect them with a waterproof case.

  • Chair material: solid acacia wood with an oil finish
  • Table dimensions: 120 x 60 x 105 cm (length x width x high)
  • Dimensions: 34 x 34 x 76 cm (wide x high x high)
  • Requires assembly: Yes
  • Delivery includes:
  • 1 x table
  • 6 x stools

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.