Skip to product information
  • Vetonek Invernadero con marco aluminio gris antracita 4,75 m²
  • Invernadero con marco aluminio gris antracita 4,75 m² vidaXL
  • Invernadero con marco aluminio gris antracita 4,75 m² vidaXL
  • Invernadero con marco aluminio gris antracita 4,75 m² vidaXL
  • Invernadero con marco aluminio gris antracita 4,75 m² vidaXL
  • Invernadero con marco aluminio gris antracita 4,75 m² vidaXL

GROUGE GRAY ANTRACITA FRAME 4.75 m²

380,56 €
380,56 € 428,31 €
You save 11% (47,75 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This spacious greenhouse has a capacity of 7,933 m³. In it, there is a considerable amount of plants, and it will be a great solution to protect your cold weather plants. Made of polycarbonate panels, this greenhouse solid is resistant to UV rays and is thermally isolated. The greenhouse has a robust aluminum construction that does not require barely maintenance with a framework (composed of 4 resistant profiles) for greater stability. The gutter system allows effective water drainage and the roof duct guarantees optimal ventilation on hot days. The ceiling panels are fixed with metal clips, which guarantees its durability and long -term use. Our greenhouse is easy to mount. Keep in mind that the roof of our greenhouse cannot endure strong snowfall.

  • Color: Anthracite and transparent gray
  • Material: Aluminum, polycarbonate
  • Dimensions: 190 x 250 x 132/202 cm (wide x high x high)
  • Land surface: 4.75 m²
  • Capacity: 7,933 m³
  • Panel thickness: 4 mm
  • UV -resistant
  • Includes a base frame (composed of 4 strong profiles)
  • Requires assembly: Yes
The greenhouse is not a construction building or a greenhouse for recreational purposes. It is an independent and temporary agricultural installation destined only to recreational gardening.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.