Skip to product information
  • Vetonek Silla colgante hamaca columpio 80 cm gris

Haamaca Swing Humancy Chair 80 cm Gray

60,78 €
60,78 € 68,41 €
You save 11% (7,63 €)
Tax included. Shipping calculated at checkout.

Description

Imagine how happy your children will be when they have fun in your patio with this rocking rocking chair! This swing has a steel structure and a wear -resistant rope network, which makes it robust and ensures high load capacity. You can adjust the height of the backrest of the chair to fit perfectly. You can also adjust the height of the entire swing to keep children's feet inside or outside the ground according to their preferences. The rocking chair provides more support and stability, so your children do not have to grab the strings for fear of falling. In that way, they can rest and relax comfortably while resting or while they swing. Each adjustable suspension rope connects the swing firmly, while four points provide the same traction force to maintain balance and guarantee safety. In addition, the design of the tassel gives you beauty.

  • Gray
  • Material: Steel, cotton
  • Dimensions: 80 x 120 cm (high diameter)
  • Seat diameter: 60 cm
  • Adjustable rope length
  • With tassel design
  • Requires assembly: Yes
  • WARNING: Maximum user weight: 100 kg
  • WARNING: Not suitable for children under 36 months.
  • Warning: only for domestic use.
Attention. Not suitable for children under 3 years. Only for domestic use.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.