Inflatable Suppro-Forro-Force Fresoul Tech Convertible 340x89x15cm

591,54 €
591,54 € 665,76 €
You save 11% (74,22 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The inflatable Suppro-Force Fresoul Tech convertible Set of Vetonek differs from the classic rigid tables. It is an inflatable model that is ready for use in a few minutes and therefore easy to transport so you can row in any water. This table has the perfect way for safe and multifunctional conduction in almost all water conditions. You can bring your yoga practice to the water, since the non -slip traction pad helps keep your balance while you make a posture. The Drop Stitch material makes the mexic portable and easy to store, with the resistance of a hard sides table. The tritech surface material is subjected to tension tests for upper durability and can support exposure to UV rays. The plate supports only 1 user at the same time. Once you are ready to use it, simply infle the SUP with the hand pump included, and it will be ready for a fabulous day in the water! The rolled strap increases security when rowing. Side asas allow you to take the SUP to your destination easily. The adjustable table of 2.17 m (85 ") can become a double -leaf rowing. The removable orza is also equipped for your windsurf. Once this is done, roll your supp path.

  • Drop Stitch and Tritech material
  • Inflated dimensions: 340 x 89 x 15 cm (length x width x high)
  • Weight capacity: 160 kg (353 lbs)
  • Non -slip pad
  • The best way for longer walks in calm waters
  • Side handles practices to transport the supply
  • Elastic rope for extra storage
  • Adjustable row of 2.17 m (85 ")
  • Removable seat with support and rest
  • Quick platform connector (mast foot base not included)
  • Removable Orza for Windsurf
  • Can be used by 1 adult at the same time
  • Vetonek article number: 65310
  • Delivery includes:
  • 1 x rowing table
  • 1 x table
  • 1 x manual pump
  • 1 x luxury backpack
  • 1 x wrapped strap
  • 2 x central fins
  • Repair game
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.