Keter Set of garden dining room 3 pieces Vermont Grafito 231692

299,22 €
299,22 € 336,76 €
You save 11% (37,54 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This compact set of Keter Vermont garden furniture is particularly appropriate for small balconies or patios and will be a functional and decorative addition. The chairs included in the Vermont Balcony set are very comfortable and have a modern rattan -looking design, as well as a reclining support. The table included has a hidden storage compartment under the board. Thanks to the weather -resistant and water PP plastic, the set of outdoor furniture is easy to clean and resistant. The Vermont set has a robust structure, but since the construction is light, all the elements are easy to move. Removable cushions are not only comfortable, but they are also easy to wash. The delivery includes 1 table, 2 chairs reclining with armrests and 2 seat cushions. Note: We recommend covering the set with rain, snow and frost.

  • Material: Plastic pp
  • Cushion material: 100% polyester
  • Color: Graphite
  • Table dimensions: 39 x 39 x 43 cm (length x width x high)
  • Dimensions of the chair: 64 x 68 x 107 cm (wide x high x high)
  • Is recline in 4 positions
  • Maximum load capacity: 110 kg
  • Delivery includes: 1 x table, 2 x reclining chairs with plates and 2 x seat cushions
  • Material: Polypropylene: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.