Kube MAD 500 Gray chair with pack 4 sidewalk
Description
KUBE MAD 500 Gray chair with Pack 4 - Robustness and Elegance with natural finish bench
Improves any exterior space with the elegant concrete chairs of the Kube range, in gray gray and rough finish. This 4 -chair set has been designed to combine durability and modern style, being perfect for parks, gardens and urban areas.
Tropical wooden planks treated with triple Lignus layer coating, which includes fungicidal, insecticide and hydrophuge protection, offer higher resistance to the elements, without sacrificing the warmth of their natural color finish. These chairs can be installed in isolation or in groups, which allows to create unique and comfortable environments in any external environment.
Main characteristics:
- Material: Prefabricated gray -rough -appearance gray concrete with tropical wooden planks.
- Wood treatment: Triple Lignus layer (Fungicide, insecticide and hydrophuge protection).
- Measures: 500x500x495 mm each unit.
- Recommended anchor: supported by its own weight, does not require additional installation.
- Ideal for outdoor spaces in urban areas, parks and gardens.
- It is sold in 4 units pack.
Combine style, robustness and functionality with Kube chairs, perfect to resist the most demanding conditions without losing their natural elegance.
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.