Skip to product information
  • Banco Axis de hormigón prefabricado gris granítico con tablones de madera tropical, mostrando un diseño robusto y acabado natural.

Kube Plus 500 Gray chair with Bank Pack 4

3.848,74 €
3.848,74 €
Tax included. Shipping calculated at checkout.
Size

Description

Kube Plus 500 Gray chair with Pack 4 - Robustness and Elegance with Natural Finish

Add style and resistance to your exterior spaces with The concrete banks of the Kube range in gray gray. This 4 banks set is ideal for parks, gardens and urban areas, thanks to its robust and modern design.

Each bank is made of prefabricated concrete with a rough finish, while its tropical wooden planks have been treated with the triple lignus cover coat, which protects against fungi, insects and moisture, guaranteeing long durability without losing the natural attraction of their finish.

Designed to be placed both in isolation and in groups, these banks do not require additional anchors, since they rely on their own weight, facilitating their installation and ensuring stability.

Main characteristics:

  • Material: Granitic gray prefabricated concrete with tropical wooden planks.
  • Wood treatment: Triple Lignus layer (fungicide, insecticide and hydrophugo).
  • Measures: 775x500x495 mm.
  • Recommended anchor: supported by your own weight.
  • Ideal for outdoor spaces such as parks, gardens and urban areas.
  • It is sold in 4 units pack.

Transform your outdoor spaces with this elegant set of banks that combine the resistance of concrete with the warmth of the wood.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.