Skip to product information
  • Vetonek Foco LED ABS 5 W blanco frío

LED ABS 5 W Focus Cold White

19,31 €
19,31 € 21,74 €
You save 11% (2,43 €)
Tax included. Shipping calculated at checkout.

Description

The LED focus is the ideal work light for any place where brilliant lighting is desired. It is suitable for the home, cars repairs, camps, electronics work or multipurpose work, etc. This work lamp saves energy thanks to LED technology. With COB, several LED chips are mounted directly on a support and form a compact and highly efficient module. Thanks to this, this LED projector presents a high light performance. With a 500 lm luminous flux and an opening angle of 120 °, it guarantees perfect lighting. Note: The product has a USB connector, but the Certified 5V USB supply source is not included.

  • Color: black and orange
  • Light color: cold white
  • Material: ABS
  • Dimensions: 16 x 10 cm (length x wide)
  • Input/output voltage: 5V, 1st
  • Power: 5 w
  • Luminous flow: 500 lm
  • Vision angle: 120 °
  • Working time: 4-8 h
  • Function: 100% igniting/50% on/flash/off
  • USB with 1 m cable
  • The support can be disconnected from the suspension.
  • Required assembly: no
This device is not designed to be used by people (including children) with reduced physical, sensory or mental abilities, or with lack of experience and knowledge, unless they have received supervision or instructions on the use of the apparatus by a responsible person of your safety. This product is not a toy. Do not allow children to play with the device.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.