Skip to product information
  • Livoo Freidora gris 3 L 2000 W

Livoo Gray Fryer 3 L 2000 W

64,54 €
64,54 € 72,64 €
You save 11% (8,10 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Take your cravings with this livoo fryer! It is perfect for preparing delicious home fritters, such as fried potatoes, snacks, fish, etc. The frying machine has a capacity of 3 liters, also suitable for up to 1000 g of fried potatoes. The temperature adjusts to 190 ° C. It has an inner stainless steel container that can be removed to facilitate cleaning. The electric fryer has heat -resistant handles and overheating protection. It is designed to be used in a practical and safe way. The oil tank can be washed separately. Follow the cleaning instructions strictly, as indicated in the user manual. In addition, it has an ignition and heat indicator light for optimal results.

  • Gray
  • Material: stainless steel
  • Dimensions: 41.5 x 23 x 23 cm (wide x high x)
  • Power: 2000 w
  • Power supply: 220-240 V ~, 50-60 Hz
  • Interior container capacity: 3 L (1000 grams of fried potatoes)
  • Frying
  • Adjustable temperature until 190 ° C
  • Removable stainless steel inner pot
  • Wire basket with removable handle
  • High position of the basket (to drain)
  • Overheating protection
  • Heat resistant mangoes
  • Cable storage
  • Ignition and heat indicator lights
  • 4 non -slip legs
  • Easy to clean

¿Cuanto material necesito?

info

Longitud de una superficie rectangular que quieras cubrir.

info

Anchura de una superficie rectangular que quieras cubrir.

Si conoces el área, puedes ingresarla directamente en metros cuadrados. Si no, el área se calculará automáticamente con el largo y el ancho.

info

Profundidad de la capa de material deseada en centímetros. No se recomienda una capa inferior a 5 cm.

info

Selecciona el tipo de material para calcular la densidad en kg/m³.

Resultado (kg)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.