Skip to product information
  • Medisana Calentador de pies FWS gris

Medisana Calentador de pies FWS gris

50,69 €
50,69 € 57,05 €
You save 11% (6,36 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este calentador de pies FWS de Medisana proporciona una agradable sensación de suavidad en los fríos días de invierno o en los días que tengas los pies cansados. El calentador de pies está hecho de una tela de felpa que brinda una sensación suave y puede calentar rápidamente los pies fríos después de una larga caminata. Puedes configurar fácilmente el calor que prefieras gracias al panel de control ergonómico en climas gélidos con los 2 niveles de temperatura ajustables. Además, es transpirable y suave por dentro. Nota: ¡No lave el calentador de pies! ¡El núcleo se lava en una lavadora a un máximo de 30°C!

  • Color: Gris
  • Material: Microfibra
  • Dimensiones: 30 x 30 x 23 cm (largo x ancho x alto)
  • Peso: 580 g
  • Longitud del cable: 2 m
  • Clase de IP: IPX1
  • Fuente de alimentación: 220-240 V~, 50 Hz
  • Calentamiento rápido con 7,2 vatios
  • Núcleo lavable máquina a 30°C
  • 2 configuraciones de temperatura
  • Función de masaje
  • Funcionamiento ergonómico con práctica luz indicadora LED
  • Sección para pies espaciosa (adecuada hasta talla de calzado 46)
  • Sistema de seguridad con protección contra sobrecalentamiento
  • Estándar 100 de Oeko-Tex®

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.