Skip to product information
  • Medisana Cojín de respaldo de exterior con calefacción OL 750 gris

Medisana Foreign support cushion with 750 gray OL heating

90,78 €
90,78 € 102,18 €
You save 11% (11,40 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

He often begins to make a little cold on a night of the end of summer, right? No If this thermal pad for Ol 750 of Medisana is on! Large plafactable seat cushion: It is a large USB exterior backup cushion, with 40x50 cm measurements. So you can enjoy fresh air until late at night. Integrated USB load port for Power Bank: The thermal cushion can be used wirelessly, thanks to the Power Bank included. With the 3 selectable temperature settings, you can choose the heat you need during use. Use the pad on the march: control can also be used with handle, so you can easily carry the thermal pad wherever you go. It goes out automatically after 20 minutes. Washable cushion case with zipper: so fresh! Wash the case from time to time to keep it clean! The case is easy to maintain, washable and has zipper. Note: Don't you think the surface is large enough? Then, the heating bodium cushion OL 750 can be combined with the OL 700 thermal pad (order separately) thanks to the modular button system.

  • Gray
  • Material: soft felt
  • Dimensions: 40 x 50 x 2.5 cm (length x width x thickness)
  • Power: 10 w
  • Great flat and heated backrest cushion
  • It can be used wirelessly thanks to the Energy Bank
  • Perfect for outdoor use in cold climates.
  • Modern design with a soft felt surface
  • 3 selectable temperature settings: 35 ° C; 40 ° C and 45 ° C.
  • Convenient "one touch" operation
  • Controls in the PAD mango
  • Robust and durable material
  • Integrated USB Load Port for Energy Bank
  • Operating time: 4 h
  • Load time: 3 h
  • Automatic off after 20 min.
  • Washable and easy maintenance cushion cover with zipper
  • Weight: 519 g

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.